PISTON- AND SCREW COMPRESSORS
FOR STANDARD-APPLICATIONS
STENHØJ-COMPRESSORS Low operational costs thanks to higher quality
STENHØJ has been manufacturing compressors for over 70 years with due care and resolution to quality. A STENHØJ compressor lasts longer but not without reason – the spare parts are available for 15 years.
SULLAIR-COMPRESSORS Cost savings through robustness and efficiency
With SULLAIR screw compressors the operator saves energy and lowers the cost for compressed air. SULLAIR apply rotors with ground profiles, by which the losses are small and the compression efficiency high. Moreover the SULLAIR screw compressors work at very low compressor speeds. The result is compressors with a longer life time and higher efficiency.
The SULLAIR screw compressors product line LS and TS are available in the 24 KT versions. This means that there is no longer any oil changing due to the 24KT high performance lubricating agent, as well as a unique 10 year guarantee on the compression air-ends.
The long-life lubricant SULLUBE and the special SULLAIR fibreglass oil filter allow oil change intervals of 8000 hours during continuous operation.
STENHØJ Piston compressors
UNIAIR / KA
•
1- or 2- stage compression
•
Driving power 3–11 kW
•
Working pressure 10 or 15 bar
•
Air cooled
•
Belt drive
•
Option: KA types built on pressure receiver
•
Compact UNIAIR Compressors – fit through every door and require little floor space
•
Quiet UNIAIR Compressors – can also be installed at the work place
STENHØJ Screw compressor
CK / SP
•
Driving power 4–55 kW
•
Working pressure 8, 10 or 13 bar
•
Air cooled
•
Belt drive
•
Option: CK types built on pressure receiver
•
Option: frequency regulation for the SP types
SULLAIR Screw compressor BDS
•
Driving power 7.5–75 kW
•
Working pressure 8, 10 or 12 bar
•
Air cooled
•
Belt drive
•
Small construction – fits through every door and requires little floor space
•
Very quiet - can also be installed at the work place
•
Option: frequency regulation for power 55 to 75 kW
SULLAIR Screw compressor LS
•
Driving power 75–112 kW
•
Working pressure 7, 8, 9.5 or 12 bar
•
Air- or water cooled
•
Direct drive
•
Slow running compression air-ends
•
Robust and long lasting machine construction
•
Spiral valve for suction volume regulation in partial load operation
•
Option: frequency regulation
•
Option 24KT-version with 10-year guarantee on the air-end
Only available in Switzerland. Other countries on request.
